Lihlahisoa

  • Moetsi oa Matsete a rekisoang ka ho Fetisisa Mobala oa Coil o Apesitsoeng ka Galvanized Prepeinted Steel

    Moetsi oa Matsete a rekisoang ka ho Fetisisa Mobala oa Coil o Apesitsoeng ka Galvanized Prepeinted Steel

    Coil e koahetsoeng ka mebala ke sehlahisoa sa lakane e chesang e entsoeng ka masenke, poleiti e chesang ea aluminium e entsoeng ka zinki, lakane e nang le electrogalvanized, joalo-joalo, ka mor'a ho phekoloa ka holim'a metsi (ho senyeha ha lik'hemik'hale le phekolo ea phetoho ea lik'hemik'hale), e koahetsoeng ka lesela kapa likarolo tse 'maloa tsa ho roala ka holim'a metsi, le ebe e apehoa mme e phekolehe.Hobane e koahetsoe ka mefuta e fapaneng ea mebala e fapaneng ea poleiti ea tšepe ea 'mala oa pente e bitsoang coil, e bitsoang coil e tlotsitsoeng ka mebala.Tšebeliso ea tšepe e entsoeng ka tšepe e chesang e nang le tšepe e le setsi sa motheo sa mebala e koahetsoeng ka tšepe ho phaella ho ts'ireletso ea lesela la zinki, ho roala ka manyolo holim'a lesela la zinki ho phetha karolo ea ho koahela le ho sireletsa, ho thibela mafome a tšepe, bophelo ba tšebeletso bo bolelele ho feta galvanized. hlobolisa, hoo e ka bang makhetlo a 1,5.Coil e koahetsoeng ka 'mala e na le boima bo bobebe, ponahalo e ntle le e ntle ea ho hanyetsa kutu, 'me e ka sebetsoa ka kotloloho

     

  • Customized ASTM ASME AISI lakane e batang ea aluminium bakeng sa thepa ea marulelo

    Customized ASTM ASME AISI lakane e batang ea aluminium bakeng sa thepa ea marulelo

    Hangata poleiti ea aluminium e arotsoe ka mefuta e 'meli e latelang:

    1. Ho ea ka motsoako oa motsoako:

    Letlapa la aluminium ea bohloeki bo phahameng (e ntšitsoeng ho tloha aluminium e hloekileng e nang le litaba tse ka holimo ho 99.9)

    Letlapa le hloekileng la aluminium (ha e le hantle le entsoe ka aluminium e hloekisitsoeng)

    Alloy aluminium poleiti (e entsoeng ka aluminium le lisebelisoa tse thusang, hangata koporo ea aluminium, manganese ea aluminium, silicon ea aluminium, aluminium magnesium, joalo-joalo)

    poleiti ea aluminium e entsoeng ka motsoako kapa poleiti e entsoeng ka brazed (sesebedisoa se khethehileng sa aluminium poleiti e fumanoang ka lisebelisoa tse ngata)

    Aluminium letlapa la aluminium (lakane ea aluminium e koahetsoeng ka lakane e tšesaane ea aluminium bakeng sa merero e khethehileng)

    2. E arotsoe ka botenya:(yuniti mm)

    aluminium lakane (aluminium sheet) 0.15-2.0

    Letlapa le tloaelehileng (letlapa la aluminium) 2.0-6.0

    Letlapa le mahareng (poleiti ea aluminium) 6.0-25.0

    Letlapa le teteaneng (poleiti ea aluminium) 25-200 poleiti e teteaneng e fetang 200

  • Theko ea fektheri e chesang ea ASTM 0.53mm bakeng sa g30 g60 g90 likhoele le lakane

    Theko ea fektheri e chesang ea ASTM 0.53mm bakeng sa g30 g60 g90 likhoele le lakane

    Koil e entsoeng ka galvanized, inela poleiti ea tšepe ka har'a tanka ea zinki e qhibilihisitsoeng, e le hore ho khomareloe holim'a tšepe ea zinki.Haholo-holo e hlahisoa ke mokhoa o tsoelang pele oa galvanizing, ke hore, poleiti ea tšepe e kolobisitsoeng e lula e qoelisoa ka har'a bateng ea zinki e qhibilihang ho etsa poleiti ea tšepe e entsoeng ka masenke;Alloyed galvanized steel plate.Letlapa lena la tšepe le boetse le entsoe ka ho qoelisoa ho chesang, empa hang ka mor'a hore le tsoe ka har'a groove, le futhumatsoa hoo e ka bang 500 ℃ ho etsa motsoako oa alloy oa zinki le tšepe.Khoele ena e entsoeng ka masenke e na le ho tiea ho hotle ho tiisa le ho cheseha.

  • Manufacturers Direct Export High Density Electrolytic Copper Copper Plate Cathode Copper

    Manufacturers Direct Export High Density Electrolytic Copper Copper Plate Cathode Copper

    Copper ea cathode ke koporo ea electrolytic.Letlapa le teteaneng la koporo e tala (99% ea koporo) e ile ea lokisoa esale pele e le palo ea letsatsi, poleiti e tšesaane ea koporo e hloekileng e ile ea lokisoa e le cathode, 'me motsoako oa sulfuric acid (H2SO4) le sulfate ea koporo (CuSO4) e sebelisitsoe. joalo ka electrolyte.Ka mor'a motlakase, koporo e qhibiliha ka li-ion tsa koporo (Cu) ho tloha ho anode ebe e fallela ho cathode.Ka mor'a ho fihla ho cathode, li-electrone li tla fumanoa 'me koporo e hloekileng (eo hape e tsejoang e le electrolytic koporo) e tla kenngoa ka har'a cathode.Tšepe le zinki, tse sebetsang ka koporo, li qhibiliha ka li-ion (Zn le Fe) hammoho le koporo.Kaha li-ion tsena ha li thata ho feta ha li bapisoa le li-ion tsa koporo, hafeela phapang e ka bang teng e lokisoa hantle nakong ea electrolysis e ka qoba li-ion tsena precipitate ka cathode.Litšila tse sa sebetseng ho feta koporo, tse kang khauta le silevera, li kenngoa ka tlaase ho sele.Letlapa la koporo le hlahang, le bitsoang electrolytic copper, ke la boleng bo holimo 'me le ka sebelisoa ho etsa lihlahisoa tsa motlakase.Pula ka tlase ho sele ea electrolytic e bapisoa le "anode seretse".E ruile ka khauta le silevera, e leng ntho ea bohlokoa haholo, 'me e na le boleng bo phahameng ba moruo ho e ntša le ho e lokisa hape.

  • ASTM A106 A53 Gr.B A36 API 5L API 5CT BS1387 ERW Welded Round Square Rectangle Pipe CS Carbon Steel Tube Seamless Steel Pipe

    ASTM A106 A53 Gr.B A36 API 5L API 5CT BS1387 ERW Welded Round Square Rectangle Pipe CS Carbon Steel Tube Seamless Steel Pipe

    Thepa ea tšepe e se nang moroko e phunyeletsoa ho tloha tšepeng eohle e chitja, 'me ha ho phala ea tšepe e cheselitsoeng holim'a metsi.Ho latela mokhoa oa tlhahiso, liphaephe tsa tšepe tse se nang moroko li ka aroloa ka liphaephe tsa tšepe tse se nang moroko tse chesang, lipeipi tse batang tse se nang moroko, lipeipi tsa tšepe tse huloang ke serame tse se nang moroko, lipeipi tse petetsang tse se nang moroko le lipeipi tse ka holimo.

    Ho ea ka sebōpeho sa karolo, li-tubes tsa tšepe tse se nang moeli li arotsoe ka mefuta e 'meli: e pota-potileng le esele.Liphaephe tse tsoang linaheng tse ling li kenyelletsa sekoere, oval, triangular, hexagonal, peo ea mahapu, bonohe ba linaleli, le li-tubes tsa mapheo.

    Seamless tšepe tube e entsoe ka tšepe e pota-potileng perforated, bokaholimo ba phala ea tšepe ntle le weld, e bitsoang seamless steel pipe.Ho ea ka mokhoa oa tlhahiso, phala ea tšepe e sa tsitsang e ka aroloa ka phala ea tšepe e chesang e kentsoeng e se nang seamless, phala e batang e pholileng e se nang seamless, phala e batang e hulang e se nang seamless, phala ea tšepe e se nang seamless, phala ea phala, joalo-joalo.

     

  • Theko e Ntle ka ho Fetisisa Cold Rolled Plate Q195 Carbon Steel Plates Automobile Steel Plate Composite steel Plate

    Theko e Ntle ka ho Fetisisa Cold Rolled Plate Q195 Carbon Steel Plates Automobile Steel Plate Composite steel Plate

    Cold rolling e entsoe ka sekoaelo sa poleiti e chesang e le thepa e tala, e kolobisitsoeng ka mocheso o tloaelehileng tlas'a mocheso oa recrystallization, poleiti ea tšepe e batang e hlahisoa ke mokhoa o batang oa ho roala, o bitsoang poleiti e batang.Botenya ba poleiti e kolobisitsoeng ka serame hangata e pakeng tsa 0.1 le 8.0mm, 'me botenya ba poleiti e pholileng e hlahisoang ke lifeme tse ngata bo ka tlase ho 4.5mm.Botenya le bophara ba poleiti e kolobisitsoeng ka serame li khethoa ke bokhoni ba thepa ea feme e 'ngoe le e' ngoe le tlhokahalo ea 'maraka.

  • Cheap Mild Ms Carbon Steel galvanized 6mm 10mm 12mm 25mm Leqephe la Letlapa la Tšepe

    Cheap Mild Ms Carbon Steel galvanized 6mm 10mm 12mm 25mm Leqephe la Letlapa la Tšepe

    Letlapa le chesang le entsoe ka letlapa le ntseng le tsoela pele kapa le roala joalo ka thepa e tala, e besitsoeng ka sebōpi, e theoleloa ke metsi a nang le khatello e matla ho ea ho leloala, leloala le hlabang ka hlooho, mohatla, ebe ka mor'a leloala la ho qetela, ho kenya ts'ebetsong ea tsamaiso e laoloang ke k'homphieutha. , Ka mor'a ho roala ha ho qetela ka mor'a ho pholile ha laminar (sekhahla sa ho pholisa se laoloang ke k'homphieutha) le coiler winding, coil e otlolohileng.Hlooho le mohatla oa moriri o otlolohileng oa curl hangata ke leleme le mohatla oa tlhapi, 'me botenya le bophara ha bo bobe.Hangata moeli o na le liphoso tse kang sebopeho sa wave, hem le sebopeho sa tora.Boima ba eona bo boima, bophara bo ka hare ba tšepe ea tšepe ke 760mm.

  • Cold/Hot Rolled Ss Sheet Grade 201 304 304L 316 316L 316ti 321 310S Inox Sheet Thickness 0.1-6mm Surface 2b/Ba/8K Stainless Steel Plate

    Cold/Hot Rolled Ss Sheet Grade 201 304 304L 316 316L 316ti 321 310S Inox Sheet Thickness 0.1-6mm Surface 2b/Ba/8K Stainless Steel Plate

    Nomoro ea mohlala: 201 304 304L 316 316L 316ti 321 310S

    Kereiti ea lintho tse bonahalang:201/202/301/302/304

    Mohlala: E teng

    Botenya: 0.1-6mm kapa joalo ka ha ho kopiloe

    Tlhaloso: Customized

    Nako ea thomello: 7-15days

  • Prime hot rolled steel coils sae j403 sae 1006 hot rolled pickled sheet sheet theko e bonolo ea tšepe ea tšepe

    Prime hot rolled steel coils sae j403 sae 1006 hot rolled pickled sheet sheet theko e bonolo ea tšepe ea tšepe

    Prime hot rolled steel coils sae j403 sae 1006 hot rolled pickled sheet sheet theko e bonolo ea tšepe ea tšepe

    Boima: 1.6-6mm

    Bophara: 850-1650mm

    S235JRM1, S235J0M1, S235JRM2, S235J0M2

  • HRC A36 Q235 Black Carbon Hot Rolled Steel Coil 1500mm bophara / Strip

    HRC A36 Q235 Black Carbon Hot Rolled Steel Coil 1500mm bophara / Strip

    1.Lebitso la Sehlahisoa: Coil ea tšepe e pholileng e chesang
    2.StandardJIS, AISI, ASTM, GB, DIN
    3.Width: 30-2200mm kapa e le litlhoko tsa bareki
    4.Botenya: 1.2-25mm e tloaelehileng, kapa e itšetlehile ka kopo ea hau
    5.Packing: maemo a kantle ho naha kapa joalo ka tlhoko ea bareki
    6. Nako ea ho fana ka nako: ka hare ho matsatsi a 7-10 a sebetsang, ho ea ka bongata ba bareki
    7.Payment: L / C kapa T / T kapa e le tlhokahalo ea bareki
    8.MOQ: 25Tons
    9.Tlhahiso: Lithane tse 20000 / Khoeli
     
  • Cold Rolled Steel Sheet ASTM A36 Low Carbon Steel Sheet Ss400 Q235 Q345 Q355 4340 4130 St37 Carbon Steel Coil Sheet Manufacturer

    Cold Rolled Steel Sheet ASTM A36 Low Carbon Steel Sheet Ss400 Q235 Q345 Q355 4340 4130 St37 Carbon Steel Coil Sheet Manufacturer

    Cold rolled steel ke tšepe e hlahisoang ke serame.Cold rolling ke ho tsoela pele ho roala poleiti ea tšepe ea No. 1 ho ea ho sepheo
    botenya ka mocheso oa kamore.Ha ho bapisoa le poleiti ea tšepe e kentsoeng ka hot-rolled, tšepe e pholileng e na le tse ling
    botenya bo nepahetseng, bokaholimo bo boreleli le bo botle, hape bo na le lisebelisoa tse fapaneng tse phahameng tsa mochini,
    haholo-holo thepa ea ho sebetsa.Hobane coil ea pele e batang e brittle ebile e thata, ha ea lokela
    ho sebetsa, kahoo ka kakaretso, poleiti ea tšepe e kentsoeng ka serame e hlokahala hore e isoe ho moreki ka mor'a ho kolobisoa,
    pickling le boemo ba bokaholimo.Botenya bo boholo ba ho roala ha serame bo ka tlase ho 0.1-8.0mm.Ka mohlala,
    botenya ba poleiti ea tšepe e kolobisitsoeng e batang lifekthering tse ngata e ka tlase ho 4.5mm.

  • ASTM 304L Stainless Steel Welded Pipe Sanitary Piping Theko ea Stainless Steel Tube/Pipe

    ASTM 304L Stainless Steel Welded Pipe Sanitary Piping Theko ea Stainless Steel Tube/Pipe

    304 tšepe e sa hloekang ke thepa e tloaelehileng ka tšepe e sa hloekang, boima ba 7.93g / cm³;E boetse e tsejoa indastering e le 18/8 tšepe e sa hloekang, e bolelang hore e na le chromium e fetang 18% le nickel e fetang 8%;Mocheso o phahameng oa ho hanyetsa 800 ℃, o na le litšobotsi tsa ts'ebetso e ntle ea ts'ebetso, boima bo phahameng, bo sebelisoang haholo indastering ea mokhabiso oa liindasteri le thepa ea ka tlung le indasteri ea lijo le ea bongaka.Empa hoa lokela ho hlokomeloa hore tšepe ea boleng ba 304 ea lijo ha e bapisoa le tšepe e sa hloekang ea 304 e tloaelehileng, index ea eona ea litaba e thata haholoanyane.Ka mohlala: ha e le hantle tlhaloso ea machaba ea 304 tšepe e sa hloekang ke haholo-holo chromium 18% -20% nickel 8% -10%, empa lijo kereiti 304 tšepe e sa hloekang ke chromium 18% le nickel 8%, lumella mefuta e fapaneng ya ho feto-fetoha le moeli. dikahare tsa metale tse fapaneng tse boima.Ka mantsoe a mang, tšepe e sa hloekang ea 304 ha se hakaalo hore ke boemo ba lijo 304 tšepe e sa hloekang.