99.99% 2mm tsarki gubar takardar mirgina-hujja gubar farantin x ray gubar takardar don x ray gubar ingot

Takaitaccen Bayani:


Cikakken Bayani

Tags samfurin

KYAUTA KYAUTA

Sunan samfur 99.99% 2mm tsarki gubar takardar mirgina-hujja gubar farantin x ray gubar takardar don x ray gubar ingot
Launi Launi/Grey/Baki/azurfa/launi mai guba
Yawan yawa 11.34g/cm 3
Tsafta 99.99%
Pb Daidai (mm) 1Pb,2Pb,3Pb,4Pb,5Pb,6Pb,8Pb,da dai sauransu ko musamman
Kayan abu 99.99% tsarkakakken gubar.
Kauri 0.5mm - 25mm
Nisa 1000mm-2000mm, ko Musamman
Tsawon 1000mm-5000mm, ko musamman.
Siffar Square, Ko A Roll.
Kunshin Filayen Lead/Ingot ɗin gubar Ana Ciki A Cikin Filastik, Waje An cika shi a cikin kwali da shari'o'in katako azaman kariya biyu.
Aikace-aikace Anti Radiation, X-Ray Garkuwa.
Dakin X-ray, Dakin DR, Dakin CT, da dai sauransu.
Garkuwar Makamashin Nukiliya,
Kayawar Sauti snd Tabbatar da Sauti.
Amfani da katako mai aminci don tabbatar da isa ga mutane lafiya.
Misali Akwai

BAYANIN KAMFANI

公司简介

NUNA KAMFANI

NUNA
NUNA 1
NUNA2

KAYANA

KAYANA 01

Ma'aikatarmu tana da layukan samarwa da yawa, tare da fitar da ton dubu da yawa kowane wata.A lokaci guda, yankan da kayan aiki za a iya yanke su.

Spot wholesale garantin ingancin sabis na kusanci

Ƙarfin fasaha na kamfanin, kayan aiki na kayan aiki na fasaha daban-daban, hanyoyin sarrafawa daban-daban, na iya samar da masu amfani da aluminum farantin karfe tsaftace mai mulki aiki, aluminum makada a tsaye partial aiki, kauri a aluminum gami Panel sawtage mai mulki aiki, aluminum farantin surface rufe aiki, da dai sauransu. , don saduwa da bukatun masu amfani tare da ƙananan batches, nau'i-nau'i iri-iri, ƙayyadaddun ƙayyadaddun bayanai, da buƙatu masu yawa.

Real kayan da real kayan ne uniform yi barga yi.

Samun hannun jari mai yawa, tabbacin ingancin samfur.

Matatun mai na shekaru masu yawa na ƙwarewar masana'antu ya cancanci amincin ku

Aikace-aikacen samfur

Aikace-aikacen samfur

Ana iya amfani da zanen gadon gubar don kera masu tara gubar, faranti na gubar, ingot ɗin gubar da bututun gubar azaman kayan kariya na rufi a masana'antar acid da masana'antar ƙarfe, kuma ana amfani da gubar azaman kumfa na igiya da fuses a cikin masana'antar lantarki.Ana amfani da alluran ledar da ke ɗauke da dalma da antimony wajen buga nau'in bugu, ana amfani da alluran dalma don yin sandunan walda da gubar, sannan ana amfani da farantin karfe da farantin karfe a masana'antar gine-gine.Gubar tana da kyakykyawar sha na X-ray da γ-haskoki, kuma ana amfani da ita sosai azaman kayan kariya ga na'urorin X-ray da na'urorin makamashin atomic.Sakamakon gubar gubar da dalilai na tattalin arziki, an maye gurbin gubar da wasu kayan a wasu fannoni.

Aiki na gubar ingot yana da ƙarfi anti-lalata, acid da alkali juriya, acid muhalli gina jiki, likita radiation kariya, X-ray, CT dakin radiation kariya, kara tsananta, sauti rufi da sauran abubuwa da yawa, kuma shi ne in mun gwada da rahusa radiation. kayan kariya.

FALALARMU

Samfuran Karfe da yawa da Akwai Sabis na Musamman.

FALALARMU (2)
FALALAR MU (1)

1. Kyakkyawan inganci da farashi mai kyau.

2. M da kyau kwarai bayan-tallace-tallace da sabis gwaninta.

3. Ana duba kowane tsari ta hanyar QC mai alhakin don tabbatar da ingancin kowane samfurin.

4. Ƙwararrun marufi don tabbatar da amincin kowane kunshin.

5. Za a iya gama sayar da gwaji a cikin mako guda.

6. Ana iya samar da samfurori akan buƙatar ku.

7. 24 hours online da kuma dace amsa

KYAUTA & BADA

Daidaitaccen Kunshin Fitarwa, Tabbatar da Isar da Ingancin Inganci.

KYAUTA & BADA
KYAUTA & BAYARWA 02
Cikakkun bayanai: Standard seaworthy shiryawa (filastik & itace) ko bisa ga abokin ciniki ta buƙatun
Cikakken Bayani: 3-10 kwanaki, yafi yanke shawarar da yawa na oda
Port: Tianjing/Shanghai
jigilar kaya Jirgin ruwa ta kwantena

FAQ

1. Yaya ingancin samfuran ku?

An kera samfuranmu bisa ƙa'idodin ƙasa da ƙasa, kuma muna gwada kowane samfur kafin bayarwa.Idan kuna son duba ingancin takaddunmu da rahotannin gwaji daban-daban, da fatan za a tambaye mu.

2. Me ya sa za ku zaɓe mu?

Zaɓin ya faru saboda inganci, sannan farashin, Za mu iya ba ku duka biyu.Bugu da ƙari, za mu iya ba da ƙwararrun samfuran bincike, samfuran jirgin ƙasa na ilimi (na wakilai), isar da kayayyaki masu santsi, shawarwarin mafita na abokin ciniki.

3. Yadda za a tabbatar da lokacin bayarwa?

Mu masana'anta ne da ke da tarin kayayyaki masu yawa, wanda ke ba da tabbacin cewa za a iya jigilar kayayyaki cikin rana mafi sauri daga ranar da aka sanya hannu kan kwangilar.

4. Yadda ake samun samfurori?

Za mu iya samar da samfurori don gwajin mai siye kyauta.

ADDU'AR 01

1.Aika tambaya kai tsaye.

2.Aika imel.

3.Tuntuɓi ta waya.

4.Contact tallace-tallace ma'aikatan.


  • Na baya:
  • Na gaba:

  • shibushiwojnushuohuawomenjiuyongyuandoushiyzngyangde,nigaosuwodadiwomenzhiqinkayuanaxieweneti,womenzhijandeewtnidaodikebukeyijiejue.zaishiwoemgnagwomenzhijiqnadaodidzennmene.

    werrtg

    bazara

    yamma

    asjgowdhaogrhg

    Ku rubuta sakonku anan ku aiko mana

    Samfura masu alaƙa

    • 2mm Pb Lead Sheet tare da ASTM GB JIS Unalloyed Unalloy Metal 0.5mm 1mm 1.5mm 99.99% 99.994% 99% X Ray Garkuwar Maker Medical Equipment

      2mm Pb Lead Sheet tare da ASTM GB JIS Unalloyed Unalloyed Unalloyed ...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...

    • Manufacturer farantin gubar CTDR makaman nukiliya hakori DSA dakin X-ray da sauran bango ray kariya farantin gubar.

      Manufacturer Lead farantin CTDR makaman nukiliya d...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...

    • 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm Tsaftace 99.994% Likitan Lead Sheet don X-ray Farantin gubar

      2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm Pure 99.994% Ni...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...

    • Farantin gubar 3mmCT Dakin Radiation Farantin gubar DR Dakin Kariyar bangon haƙori Farantin gubar farantin gubar fata mai naɗaɗɗen gubar.

      Lead farantin 3mmCT dakin Radiation kariya Gubar ...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...

    • Yarjejeniyar Kai tsaye Tabbataccen Lead Sheet 0.5mm 2mm 3mm Na Musamman Takardun Jagorar Kariyar Radiation

      Yarjejeniyar Kai tsaye Tabbataccen Lead Sheet 0.5mm 2mm 3mm Kauri ...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...

    • Masu sana'a tabo takardar gubar 2mm x-ray dakin kariya ga takardar farantin karfe mirgine kariyar bangon dakin CT

      Manufacturers tabo gubar takardar 2mm x-ray dakin pr ...

      BAYANIN KYAUTA KYAUTA takardar jagora, An fi amfani da shi wajen kera batirin ajiyar gubar.Ana amfani da shi azaman na'urar kariya ta rufi don gubar acid da bututun gubar a cikin masana'antar acid da ƙarfe.A cikin masana'antar lantarki, ana amfani da gubar azaman kumfa na USB da fiusi.Ana amfani da allunan dalma mai ɗauke da tin da antimony azaman nau'in bugu, gami da tin dalma ...