Galvanized Steel Coil
-
ASTM hot dipped factory price 0.53mm for g30 g60 g90 galvanized coils and sheet
Galvanized coil, dip a sheet steel plate into a melted zinc tank, so that the surface adhesion of a zinc sheet steel. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the melting zinc bath to make galvanized steel plate; Alloyed galvanized steel plate. This steel plate is also made by hot dipping, but immediately after it is out of the groove, it is heated to about 500℃ to create an alloy coating of zinc and iron. This galvanized coil has good coating tightness and weldability.
-
Galvanized steel coil galvanized hot dip galvanized plate high zinc layer galvanized steel sheet flat 0.2~6.0MM
Galvanized Steel Coil
A thin sheet of steel is immersed in a molten zinc tank so that the surface is adhered to a thin sheet of zinc. The main use of continuous galvanizing process production, that is, the rolling steel plate is continuously immersed in the melting zinc plating tank to make galvanized steel plate.
-
DX51D Galvanized Steel Coil Zinc Coated Gi Sheet Galvanized Steel Rolls
Thickness: 0.35 to 10 mm
Width: 600-2500 – mm
Material: HC340LAD+Z HC340LAD+Z HC220BD+Z DX54D-DX56D+Z
HC220BD+Z DX54D-DX56D+Z DX51D+Z-MD DX51D+Z-HR GB/T2518-2008 EN 10327-2004 DX52D-DX53D+Z
SGH340 SGC340 SGH440 JIS G3302-2010 Q/HG007-2016
GB/T2518-2008 S550GD S350GD+Z+Z
State Grid DX51D+ Zq /HG007-2016 GB/T2518-2008
-
Hot DIP Dx51d 120g Zinc Coated Gi Steel Galvanized Steel Coil for Roofing Sheet Price
Hot Dipped Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.
Hot-dip galvanizing is the process of applying a protective zinc coating to a steel sheet or iron sheet, to prevent rusting.
Excellent anti-corrosion, paintability, and processability due to the self-sacrificing characteristic of zinc.
Available to select and produce the desired amount of zinc gilded and in particular enables thick zinc layers(maximum 120g/m2).
Classified as either zero spangle or extra smooth depending on whether the sheet undergoes skin pass treatment.
